How to Clean Brass Jewelry (Without Ruining It)

For solid (raw) brass: wash with warm soapy water, then rub on a paste of lemon juice and baking soda (or vinegar, salt and flour), rinse and dry completely. For plated or antiqued brass: use only mild soap, water and a soft cloth, because acids and abrasives remove the finish.
Step 1: Is it solid brass or plated?
This decides which method is safe. Check the product description first. Raw brass is the same color all the way through; plated pieces are a base metal covered with a thin color layer, often brighter gold, silver, rose gold or black. If you see a different color showing through at worn edges, it is plated.
Method 1: Warm water and dish soap (all brass)
- Mix a few drops of mild dish soap into warm water.
- Soak for a few minutes, then brush gently with a soft toothbrush, getting into the details.
- Rinse in clean water and dry thoroughly with a soft cloth. Leftover moisture causes new tarnish.
This is safe for every finish and removes skin oils and dirt that dull the surface.




Method 2: Lemon juice and baking soda (raw brass)
- Mix the juice of half a lemon with a teaspoon of baking soda until it stops fizzing and forms a paste.
- Rub it onto the brass with a soft cloth or toothbrush for one or two minutes.
- Rinse well and dry.
Method 3: Vinegar, salt and flour paste (heavy tarnish)
- Mix equal parts white vinegar, salt and flour into a paste.
- Spread it over the tarnished areas and leave for 10–15 minutes. For very dark pieces, up to an hour.
- Rinse in warm water, buff and dry.
Method 4: Ketchup or tomato paste (quick fix)
Tomatoes are mildly acidic. Rub a thin layer on, wait 10 minutes, rinse and dry. It works well on stamped tags and cuffs where the paste can reach every surface.
Method 5: Polishing cloth or brass cleaner
A jewelry polishing cloth is the fastest way to bring back the shine on charms, blanks and findings, with no liquids involved. Commercial metal polishes also work on raw brass. Follow the label and rinse thoroughly afterwards.
What to avoid
- Acids and abrasives on plated pieces: they strip gold, silver and antique finishes.
- Soaking pieces with glue or stones: water and acids can weaken glued cabochons and studs.
- Bleach and harsh chemicals, which can pit and discolor the metal.
- Scouring pads and toothpaste with grit, which leave fine scratches.
- Polishing antiqued or black oxidized finishes, which are darkened on purpose; polishing removes the contrast.
How to keep brass shiny after cleaning
- Seal it with a clear jewelry lacquer or microcrystalline wax.
- Store each piece in a small zip bag, with an anti-tarnish strip for long storage.
- Put jewelry on after perfume and lotion, and take it off before washing and swimming.
Why brass tarnishes in the first place, and whether it is safe on skin: Does Brass Tarnish?
Frequently asked questions
Can I clean brass jewelry with vinegar?
Yes for raw brass, ideally mixed with salt and flour into a paste. Never use vinegar on plated pieces.
How often should I clean brass jewelry?
Wipe it after wearing and do a deeper clean whenever the color looks dull, usually every few weeks for pieces worn often.
Can I clean brass in an ultrasonic cleaner?
Solid brass without glue or stones, yes. Avoid it for glued pieces and delicate plated finishes.
Shop Raw Brass Findings & Charms
View all →More jewelry making guides
All guides →
How to Stamp Metal Jewelry: A Beginner's Guide to Stamping Blanks
Metal stamping needs steel letter stamps, a 1–2 lb hammer, a steel bench block and soft-metal blanks like brass or copper. Strike...
Jump Ring Sizes Chart: Gauge, mm and How to Open and Use Jump Rings
Jump rings are sized by outer diameter in mm and wire thickness in gauge or mm. 4–6 mm rings in 0.7–0.8 mm...
Types of Earring Hooks and Ear Wires (and How to Make Your Own)
Fish hooks (French wires) are the most common earring hooks; leverbacks and kidney wires are the most secure; hoops, threaders and shepherd...
